Camel Precision Co., Ltd. - CML - A professional manufacturer of hydraulic pumps and hydraulic valves, and has sold Eckerle internal gear pumps to Asia for nearly 20 years.

High Pressure Internal Gear Pump IGH | Globally Certified Hydraulic Valves & Pumps – CML Wins 2024 REBRAND 100® Award

The IGH series is suitable for all kinds of hydraulic industrial machinery, such as shears, bending machines, presses machines, punching machines, cutting machines, and other high-pressure applications, in which a fixed-frequency motor is equipped. IGH is good at maintaining continuous stable pressure, with low noise, low internal leakage, and high pressure output. Other characteristics like multiple pumps can be connected in series to increase the output displacement, or the combination of large and small pumps to apply to high-low pressure conditions, can substantially save motor power and overall cost. Thanks to its low pulsation, IGH is also suitable for hydrostatic systems. CML, Camel Hydraulic, Camel Precision is a Taiwan based high-quality High Pressure Internal Gear Pump IGH manufacturer andHigh Pressure Internal Gear Pump IGH supplier With more than 40 years experience, CML is specialized in Vane Pump, internal gear pump, external gear pump, solenoid valve, modular valve, flow control valve, pressure control valve, check valve, servo system, power unit, hydraulic pump, hydraulic valve, hydraulic accessory manufacture. since 1981.

CML High Pressure Internal Gear Pump IGH-4F-16-R. | CE & ISO Approved Hydraulic Solutions | Trusted by Industry Leaders – CML

Hydraulic Pump | 40 years experience, Professional of hydraulic pumps & Valves, Asia Sole Agent of Eckerle, Experienced team, Rich product types, Total solution, Flexible customization, Global Distribution.

High Pressure Internal Gear Pump IGH - CML High Pressure Internal Gear Pump IGH-4F-16-R.
  • High Pressure Internal Gear Pump IGH - CML High Pressure Internal Gear Pump IGH-4F-16-R.

High Pressure Internal Gear Pump IGH

IGH-2E-8-R

Hydraulic Pump

The IGH series is suitable for all kinds of hydraulic industrial machinery, such as shears, bending machines, presses machines, punching machines, cutting machines, and other high-pressure applications, in which a fixed-frequency motor is equipped. IGH is good at maintaining continuous stable pressure, with low noise, low internal leakage, and high pressure output. Other characteristics like multiple pumps can be connected in series to increase the output displacement, or the combination of large and small pumps to apply to high-low pressure conditions, can substantially save motor power and overall cost. Thanks to its low pulsation, IGH is also suitable for hydrostatic systems.

Inquire Now

Media Gallerys

CML's products are widely used in all kinds of manufacturing machinery, metal processing machinery, mobile machinery, hydraulic systems, servo systems, and integrated hydraulic oil and electricity application.

Combining the characteristics of different Hydraulic pumps to achieve low noise creates a friendly working environment; low energy consumption joins environmental protection. Low consumption for cost-saving, etc., Most importantly, it can greatly improve the accuracy and stability of mechanical operation and maximize customer benefits.

Feature

  • High pressure output, 300 bar max.
  • Extremely low noise.
  • Smooth operation & low pulsation.
  • High overall efficiency from axial & radial pressure compensation.
  • Good suction power and extensive oil viscosity range.
  • Optional displacement from 3.5 to 64 c.c./rev.
  • Multi-connected pump combination available for manifold hydraulic circuit applications.

Application

  • Suitable for fixed speed motor application, continuously stable pressure holding for long.
  • For various hydraulic industrial machines, such as cutting machines, etc.

IGH



Specification

Internal Gear Pump Series
IGH4F32R20
Internal Gear Pump SeriesSeries No.Shaft SpecDisplacementRotation DirectionDesign No.
IGH High Pressure Internal Gear PumpIGH-2F: ISO type
E: DIN type		3.5 c.c. - 8 c.c.R: Clockwise
L: Counterclockwise		-
IGH-310 c.c. - 16 c.c.
IGH-420 c.c. - 32 c.c.
IGH-540 c.c. - 64 c.c.

* View form shaft end.

Multiple Internal Gear Pump Series
Front Pump SeriesRear Pump Series
IGH4E32IGP4S32R
Internal Gear Pump SeriesSeries No.Shaft SpecDisplacement of shaft end pump (c.c./rev)Internal Gear Pump SeriesSeries No.SDisplacement of Rear pump (c.c/rev)Rotation Direction
IGH Hight Pressure Internal Gear PumpIGH-2E: DIN type3.5 c.c. - 8 c.c.IGHIGH-2S: Secondary / Rear pump3.5 c.c. - 8 c.c.R: Clockwise
L: Counterclockwise
IGH-310 c.c. - 16 c.c.IGH-310 c.c. - 16 c.c.
IGH-420 c.c. - 32 c.c.IGH-420 c.c. - 32 c.c.
IGH-540 c.c. - 64 c.c.IGH-540 c.c. - 64 c.c.

* View form shaft end.
REMARK: Normally the bigger pump should be set in front of smaller one; for pumps with same size, the one with higher pressure is usually ahead of the one with lower pressure, and so forth if there are more than two pumps connected.

Model No.

IGH-3F-13-R, IGH-3F-16-R, IGH-4F-20-R, IGH-4F-25-R, IGH-4F-32-R, IGH-5F-40-R, IGH-5E-40-R IGH-5F-50-R, IGH-5F-64-R, IGH-6F-80-R, IGH-6F-125-R

Gallerys

Code

Model Code
CML High Pressure Internal Gear Pump Model Cod CML High Pressure Internal Gear Pump Model Cod
Data

Technical Data
CML Servo type Internal Gear Pump IGP Technical Data CML High Pressure Internal Gear Pump Technical Data
Chart

Performance Curve
CML High Pressure Internal Gear Pump Performance Curve
DWG

Measurement
CML High Pressure Internal Gear Pump Measurement IGH 2 IGH 3 CML High Pressure Internal Gear Pump Dimension, Diagram IGH 4 IGH 5 CML Double High Pressure Internal Gear Pump Measurement, Dimension, Diagram CML Double High Pressure Internal Gear Pump Measurement, Dimension, Diagram
Notice

Instruction
CML High Pressure Internal Gear Pump Instruction
Related Products
Download

Products

About CML

Click to download for more company

High Pressure Internal Gear Pump IGH | EMC, ISO 9001, and CE Certified Hydraulic Valves – CML’s Global Recognition

Located in Taiwan since 1981, Camel Precision Co., Ltd. is a High Pressure Internal Gear Pump IGH (model: IGH-2E-8-R ) manufacturer in Machinery and Equipment Manufacturing Industry.

In 1981 Camel Precision Co.,Ltd was founded. The management of company fully awards of high quality products requires not only sophisticate machinery, But good knowledge in technology is also important as well. Company invited senior engineers from Germany and Japan to lead the manufacturing and training of local engineers in hydraulic industry. We offer our customers industrial pumps, solenoid directional control valves, hydraulic pumps, vane pumps, external gear pump, internal gear pump, directional valve, hydraulic valves...etc.

CML, Camel Hydraulic, Camel Precision has been offering customers high-quality Vane Pump, Variable Displacement Vane Pump, Internal Gear Pump, Eckerle Asia Agent, External Gear Pump, Solenoid Valve, Modular Valve, Pressure Reducing Valve, Flow Control Valve, Hydraulic Valve since 1981, both with advanced technology and 38 years of experience, CML, Camel Hydraulic, Camel Precision ensures each customer's demands are met.

Company Facts in Numbers

0

Years of industry experience

0

Number of clients served

0%

Customer repurchase rate