High-Low Pressure application Vane Pump + Gear Pump Combo( Hybrid Energy Saving )

CML High-Low Pressure application Vane Pump + Gear Pump Combo Series share a single motor,The combined application of variable vane pump and gear pump series share a single motor. It not only saves cost and installation space, but also combines the low noise of the vane pump and the high-pressure output performance of the gear pump. The combination of low-pressure large-flow variable pump and high-pressure small-displacement gear pump can effectively save power; in the standby state, the loop design of our products avoid rapid oil temperature elevated to achieve the effect of energy saving.The advantages are direct-coupled same shaft combination , power saving and achieve energy saving effect , saving cost and space by sharing a motor , under the standby state, the loop design of the combination can effectively avoid the rapid oil temperature elevated.

🚩P.S.You can inform the pressure and flow rate, as well as the operating conditions of the machine, and CML can choose the most suitable model for you.

Low Pressure Variable Vane Pump+External Gear Pump-SF+EGA

CML Low Pressure Variable Vane Pump pressure can be adjusted in the range of 5 - 70 bar, and the flow adjust range is 8 - 40 cm3/rev. A Series Compact Low Noise External Gear Pump –EGA pressure can reach 210 ( bar ), and the flow can be adjusted in the range is 1.2 - 7.8 cm3/rev

Medium Pressure Variable Vane Pump+ Eckerle's Pump-SM+EIPS

Medium Pressure Variable Vane Pump –SM pressure can be adjusted in the range is 15 - 140 ( bar )，and the flow adjust range is 30 - 40 cm3/rev。 Eckerle Internal Gear Pump –EIPS pressure can reach 320 ( bar )，and the flow can be adjusted in the range is 1.6 - 5.0 cm3/rev。

Medium Pressure Variable Vane Pump+ External Gear Pump-SM+EGA

Medium Pressure Variable Vane Pump –Sm pressure can be adjusted in the range is 15 - 140 ( bar )，and the flow adjust range is 30 - 40 cm3/rev。A Series Compact Low Noise External Gear Pump –EGA pressure can reach 210 ( bar ), and the flow can be adjusted in the range is 1.2 - 7.8 cm3/rev

Low Pressure Variable Vane Pump

CML Low Pressure Variable Vane Pump pressure can be adjusted in the range of 5 - 70 bar, and the flow adjust range is 8 - 40 L/min. Before inquiring, you can inform the working pressure and flow, as well as the working conditions of the machine, and we will select the most suitable model for you.

Variable Piston Pump

CML Piston Pumps has short response time characteristic, with lower noise level and low pressure consumption which heavy load bearing for long service life.

Cartridge Valve

In IMTS exhibition, CML will present various Cartridge Valves such as Relief Valve, Reducing Valve, Relieving Valve, Sequence Valve, Flow Control Valve, Flow Divider-Combiner, Counterbalance Valve, Check Valve, Shuttle Valve, and Solenoid Valve.

Air-Cooled Radiator

CML air-cooled radiators are divided into different pressure levels including low, medium-low, medium, and medium-high models. Our plate-fin-designed radiators possess much higher heat exchange efficiency, as compared with other types like copper-pipe radiators, they are at least 10-20 times better in heat radiating.

Pressure Accumulator

CML's welded diaphragm accumulators are compact, lightweight and space-saving, with low cost and high efficiency.

Solenoid-Operated Directional Valve

CML's Solenoid-Operated Directional Valve is a direct-acting electromagnetic operated directional slide valve as a standard type, which can be changed without draining the coil and can be connected either individually or centrally, and has manual emergency operation.