Medium pressure air-cooled coolers | Globally Certified Hydraulic Valves & Pumps – CML Wins 2024 REBRAND 100® Award
The Medium-pressure type coolers are suited for use on a variable vane pump hydraulic system, in which its motor is not bigger than 3HP and the system pressure does not exceed 70 bar, to cool the heated oil from the drain port. The pressure that goes to the cooler's inlet should be under 20 bar.
CML air-cooled radiators are divided into different pressure levels including low, medium-low, medium, and medium-high models. Our plate-fin-designed radiators possess much higher heat exchange efficiency, as compared with other types like copper-pipe radiators, they are at least 10-20 times better in heat radiating. CML, Camel Hydraulic, Camel Precision is a Taiwan based high-quality Medium pressure air-cooled coolers manufacturer andMedium pressure air-cooled coolers supplier With more than 40 years experience, CML is specialized in Vane Pump, internal gear pump, external gear pump, solenoid valve, modular valve, flow control valve, pressure control valve, check valve, servo system, power unit, hydraulic pump, hydraulic valve, hydraulic accessory manufacture. since 1981.
Medium pressure air-cooled coolers
AW0607, AW0607-CA2, AW408-CA2, AW408R-CA2, AW0608-CA2, AW0608L-CA2
CML Air-cooled radiator series, Plate-fin coolers, Heat exchangers, Plate-fin hydraulic oil coolers, Plate-fin heat exchangers
The Medium-pressure type coolers are suited for use on a variable vane pump hydraulic system, in which its motor is not bigger than 3HP and the system pressure does not exceed 70 bar, to cool the heated oil from the drain port. The pressure that goes to the cooler's inlet should be under 20 bar.
CML air-cooled radiators are divided into different pressure levels including low, medium-low, medium, and medium-high models. Our plate-fin-designed radiators possess much higher heat exchange efficiency, as compared with other types like copper-pipe radiators, they are at least 10-20 times better in heat radiating.
Media Gallerys
-
CMLMedium pressure air-cooled coolers AW0608-CA2
-
CMLMedium pressure air-cooled coolers AW0607 -
CMLMedium pressure air-cooled coolers AW0608L-CA2
Not only helps prevent the hydraulic system from overheating but also reduces the total cost, CML air-cooled radiator series is the best heat dropping solution for your hydraulic system.
A suitable cooler will be keeping the viscosity coefficient for hydraulic fluid, thus it generates higher operational economics and production environmental benefits.
If a system is not properly planned to control heat problems, while the oil temperature gets too high under continuous and high-intensity work, it is likely to cause poor lubricity, internal leakage, and cavitation., resulting in parts abrasion, oil quality deterioration, and so on; it will even affect the machine operation and production precision.
Aliases: Air-cooled radiator series, Plate-fin coolers, Heat exchangers, Plate-fin hydraulic oil coolers, Plate-fin heat exchangers.
Medium-pressure type coolers AW0607, AW0607-CA2, AW408-CA2, AW408R-CA2, AW0608-CA2, AW0608L-CA2 can be a replacement for:
AW0607,OA225-4TB, AW0607-CA2, AW407-CA2, OA225-A2, AL404-CA2, AW407-CA2, OA217-A2, S1-20-4T6CA2, S1-21-4T6CA2, AL404-CA2, AW407-OA217-A2, S1-20-4T6CA2, S1-21-4T6CA2, AW0608-CA2, S1-21-4T6CA2, OA285-A2, AW0608L-CA2, OA388-A2, S1-31-4T6CA2
Feature
- Compact structure, lightweight, excellent heat exchange efficiency
- Extend hydraulic system/components’ lifetime
- Save the cost of hydraulic fluid
- Improve the mobility of hydraulic system and extend its working time
- Reduce the frequency of repairs and failures due to parts abrasion
- Make machine operation efficiently and create high-quality machining conditions
Application
- Suitable for all kinds of hydraulic stations/systems, diverse machinery
Specification
| AW | 408 | L | C | A2 |
|---|---|---|---|---|
| Product Series | Frame code | Design no. | Metal Case cover | Fan Voltage |
| AW Medium-pressure air-cooled coolers |
408 | */None：Stamdard type R：Right socket |
None：Without case C：With case |
A1: AC 110V A2 : AC 220V A3 : AC 380V D1 : DC 12V D2 : DC 24V |
| 0607 | */None：Standard type | |||
| 0608 | */None：Standard type L：Dual fan |
| Model | Inlet/outlet PT |
Max flow (LPM) |
Inlet pressure (bar) |
Wiring type | Replaceable models |
|---|---|---|---|---|---|
| AW0607 | 1/2" | 20 | 15 | X | AW0607,OA225-4TB |
| AW0607-CA2 | 1/2" | 20 | 15-20 | Socket | AW0607-CA2, AW407-CA2, OA225-A2 |
| AW408-CA2 | 1/2" | 25 | 15-20 | Socket | AL404-CA2, AW407-CA2, OA217-A2, S1-20-4T6CA2, S1-21-4T6CA2 |
| AW408R-CA2 | 1/2" | 40 | 15-20 | Socket | AL404-CA2, AW407-OA217-A2, S1-20-4T6CA2,S1-21-4T6CA2 |
| AW0608-CA2 | 1/2" | 30 | 15-20 | Socket | AW0608-CA2, S1-21-4T6CA2, OA285-A2 |
| AW0608L-CA2 | 1/2" | 40 | 15-20 | Socket | AW0608L-CA2, OA388-A2,S1-31-4T6CA2 |
Add-ons
| Air Filter | ||||
|---|---|---|---|---|
| Advantages | Prevent cooling fins from dust accumulation and affecting cooling efficiency. | |||
| Extend the service life of air-cooled oil cooler. | ||||
| Easy to dismount and clean, can be cleaned with water and foam. | ||||
| For more information, please contact our sales department. | ||||
- Code
-
Model Code
- Data
-
Technical Data
- DWG
-
Measurement
- Notice
-
Notice
- Related Products
-
Variable Vane Pump with Cooling Circulation Pump VCM + CG
VCM-SF+CG, VCM-SM+CG, VCM-DF+CG
Variable Displacement Vane Pump with Cooling circulation pump is CML Unique and patented design. First, improve machining accuracy. By sucks in heated oil from the tank and delivers it to the radiator....
Details
Medium & low-pressure air-cooled coolers
AF0510-A2, AF-0510T-CA2, AF0510S-CA2, AL404T-CA2, AL608T-CA2, AL608T, AL404T,
The Medium & low-pressure type coolers are suited for use on a variable vane pump hydraulic system, in which its motor is not bigger than 3HP and the system pressure does not exceed 70 bar, to cool the heated...
Details
Medium & high-pressure air-cooled coolers
AH630-CA2, AH0608T-CA2, AH0608LT/RT, AH1012-CA2/3, AH1215-CA2/3, AH1418-CA2/3, AH1470-CA2/3, AH1428-ca2/3, AH1680-CA2/3
The Medium & high type coolers are suited for use on a variable vane pump hydraulic system, in which its motor is not bigger than 3HP and the system pressure does not exceed 70 bar, to cool the heated...
Details - Download
-
Popular Products
Download 
Medium pressure air-cooled coolers | EMC, ISO 9001, and CE Certified Hydraulic Valves – CML’s Global Recognition
Located in Taiwan since 1981, Camel Precision Co., Ltd. is a Medium pressure air-cooled coolers (model: AW0607, AW0607-CA2, AW408-CA2, AW408R-CA2, AW0608-CA2, AW0608L-CA2 ) manufacturer in Machinery and Equipment Manufacturing Industry.
In 1981 Camel Precision Co.,Ltd was founded. The management of company fully awards of high quality products requires not only sophisticate machinery, But good knowledge in technology is also important as well. Company invited senior engineers from Germany and Japan to lead the manufacturing and training of local engineers in hydraulic industry. We offer our customers industrial pumps, solenoid directional control valves, hydraulic pumps, vane pumps, external gear pump, internal gear pump, directional valve, hydraulic valves...etc.
CML, Camel Hydraulic, Camel Precision has been offering customers high-quality Vane Pump, Variable Displacement Vane Pump, Internal Gear Pump, Eckerle Asia Agent, External Gear Pump, Solenoid Valve, Modular Valve, Pressure Reducing Valve, Flow Control Valve, Hydraulic Valve since 1981, both with advanced technology and 38 years of experience, CML, Camel Hydraulic, Camel Precision ensures each customer's demands are met.
Company Facts in Numbers
0
Years of industry experience
0
Number of clients served
0%
Customer repurchase rate